3M REAR Windows Tinting Film for Fiat 500 Approved | OBSIDIAN 25 MEDIUM LIGHT

Description

REAR WINDOWS Tinting Film KIT for Fiat 500, with 3M™ Film Obsidian 25 MEDIUM LIGHT | ABG Approved for Legal Use | Pre-cut NOT Shaped Kit.
(Premium Professional Series - NO Black Shade)

The 3M™ OBSIDIAN Film represents the ELITE in Quality Level for those looking for a higher Quality Approved Film.

- KIT INCLUDES 3 PIECES | 2 Rear Windows - 1 Rear Windshield (Pre-cut NOT Shaped Kit, +10% larger than your Windows)
- PREMIUM QUALITY | Obsidian is part of the 3M High Level Professional Range (Not to be confused with Black Shade, Economic Non-Professional Range).
- ABG APPROVED | Stamped approval, approval documents from the German Federal Office (KBA Kraftfahrt Bundesamt) available.
- DARKENING 25 | Medium Light, Transmits 22% of Visible Light, Represents the Perfect Combination Between Sporty Aesthetics and Utility in Terms of Comfort and Protection.
- 10 YEAR WARRANTY | 3M™ Manufacturer Warranty 5 years + 5 Extended by the Supplier.


THE PACKAGE INCLUDES:

- 2 Rear Window Films
- 1 Rear Windshield Film
- ABG Homologation Certificate
- Declaration of Approval for Installe


INFO:
Pre-cut Professional Tinting Film Kit, NOT Shaped, for Car Front Windows, it Includes 3 pieces of pre-cut film with a size margin larger than your car windows by approximately 10%, giving the possibility of darkening your rear windows and windshield with the PRESTIGIOUS "OBSIDIAN" FILM, part of the Professional Range of 3M™ Brand Films, in 100 Micron Pigmented Polyester, Non-Metallic, with Acrylic Pressure Adhesive and an Anti-Scratch Coating.

ATTENTION not to be confused with the Black Shade which is part of the 3M Non-Professional Economic Film Range.


- WHY QUALITY
Preferring a premium quality professional blackout film like OBSIDIAN means choosing the best, high quality films offer advantages on all 5 fronts: Installation, Aesthetics, Protection, Durability and Maintenance; In particular:

INSTALLATION Is Facilitated by the correct thickness and the Excellent Malleability that a Film of this level offers, forgiving small errors during application, not being damaged and not releasing micro-scratches. It is always more difficult to apply a low quality pre-cut film compared to a high quality one.

AESTHETICS of a blackout film of this level is very different from common films, as it is 100 micron non-metallized and offers a more detailed natural and clean darkening.

PROTECTION is a factor that should not be underestimated, the very high level of UV ray shielding protects people and interiors even in the case of very light shades, and also keeps splinters together in the event of glass breakage.

DURABILITY reigns supreme on high-performance films, as they are the only ones that are able to preserve their initial quality over the years when exposed to the most aggressive atmospheric agents. Replacing a damaged or no longer pleasant blackout film is always an unpleasant and onerous problem.

MAINTENANCE on a professional film like OBSIDAN is almost completely negligible or can be carried out in total peace of mind as it has an anti-scratch coating that is very difficult to damage and easy to clean.


- SHADE
OBSIDIAN 25 from 3M™ Brand in Intense Black Color, Offers the windows a Particularly Attractive and Strong Tint in MEDIUM LIGHT Tone.

- LEGALITY
It is ABG approved by the German Federal Body, in ITALY application is ONLY permitted on rear windows, it has Approval Certificates valid throughout the EUROPEAN TERRITORY with Approval Stamped on Film.

- MERITS
- Does not interfere with GPS and cell phone signals as it is metal-free
- Blocks 99.8% of harmful ultraviolet (UV) rays, up to the equivalent of a sun protection factor (SPF) 1000, protecting adults, children, interiors and skin while significantly reducing the possibility of discoloration.
- Significantly reduces glare and increases visual comfort offering greater privacy to protect you and your valuables while offering a refreshed aesthetic.
- Reduces the heat inside the car. By keeping the interior cool, less overheating of up to 50% leads to a reduction in consumption linked to the use of the air conditioner.
- Improvement in terms of safety, in the event of the glass breaking the splinters remain attached to the film, preventing damage to people and discouraging theft attempts.
- The 100 Micron Non-Metallic Obsidian films are easy to clean, scratch-resistant and guarantee good visibility at night.

3M films must be applied professionally by qualified and well-trained personnel.

COMPATIBILITY:

ATTENTION: in Italy application is only permitted on rear windows and rear windshields. We invite you to check the individual regulations of each state.

- For Fiat 500 (All Versions and Years)
- Pre-cut, non-shaped pieces, 10% Larger in size, capable of covering all rear windows


APPLICATION:

- In addition to the film for the application you will need: Spatula, Cutter, Water and Fabric Softener, Nebulizer, Hairdryer or Heat Gun.
- The film must always be applied internally to the glass, however the external part is also necessary, which is fundamental for shaping and modeling the film before the final application on the internal part.

- Cut the film with a good margin compared to the size of the glass to be darkened (3-5cm).
- Thoroughly clean the glass internally and externally 2-3 times.
- Spray the mixture of water and softener mixed in a ratio of 1:10 on the outside of the glass.
- Apply the Film Externally to the Glass, Keeping the adhesive part of the Film facing towards you.
- Imprint the Film on the External Glass with the Spatula Forming a Large H.
- Shape the Film Using a Hairdryer and Spatula. The objective is to remove all the bubbles by making the Film adhere perfectly to the External Glass.
(the better it is processed now the easier it will be to move and apply the film internally later)
- Once the film is completely adhered without bubbles, shape it with the cutter by cutting off the excess, remaining within the margin of 2-3mm from the edge of the glass.
- Still leaving the film on the outside of the glass, make sure again that the inside of the glass is clean and proceed to spray the solution of water and softener inside the glass.
- Remove the protective film on the adhesive area of the film. Help yourself to remove it by spraying more water and fabric softener.
- Move the film to the inside of the glass, this time with the adhesive part facing the glass itself.
- Shape and flatten the film with the spatula, removing bubbles and liquid. (if the hairdryer has been used previously it will not be needed now)

- The glasses are operational after 24 hours
- Final adhesion is achieved after approximately 15 - 20 days at 18° C and in dry climate conditions.


MAINTENANCE AND CLEANING
Use high-quality cleaners specifically for glass surfaces. The cleaning system (cloth, sponge, etc.) must be wet and not abrasive with a pH value between 6 and 8 (neither too acidic nor too alkaline).


Although simple and intuitive FOR OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility if the item is assembled and subsequently removed.
We trust in your common sense.